English
+86-514-85597449
abert@anchorchain.net
Home > Products

Products

New Products

Products

View as  
 
JIS F 7354 Cast Iron 5K Screw- Down Check Angle Valves

JIS F 7354 Cast Iron 5K Screw- Down Check Angle Valves

JIS F 7354 Cast Iron 5K Screw- Down Check Angle Valves: Marine Cast Steel Screw Down Check Angle Valve also can be called as Marine Cast Steel Angle SDNR Valve or SDNR Angle Valve. It is suitable for the pipe system with the medium fresh water, air & other gas, oil and steam with the temperature not over 300 centigrade degree.

Read MoreSend Inquiry
Hydraulic Folding Crane

Hydraulic Folding Crane

Hydraulic Folding Crane Foldable Knuckle Boom Cranes are reliable and effective cranes for general cargo handling and service onboard ships and offshore units.

Read MoreSend Inquiry
Rectangular Base Eye Plate

Rectangular Base Eye Plate

Rectangular base eye plate are essentail for rigging systems.

Read MoreSend Inquiry
Pawl Type Anchor Chain Stopper

Pawl Type Anchor Chain Stopper

Pawl Type Anchor Chain Stopper Chain stopper can fix the anchor chain and prevent it slip out.

Read MoreSend Inquiry
GB290-84 Hawse Pipe Chain Wheel

GB290-84 Hawse Pipe Chain Wheel

GB290-84 Hawse Pipe Chain Wheel Marine chain wheel, installed between hawse pipe and chain stopper, is a kind of marine chain roller which is used to avoid the friction between anchor chain and hawse pipe. CB290-84 chain wheel for hawse pipe is mainly made of casting steel and carbon fiber steel. Its surface is clean and smooth. There is no any defects such as airhole, crack which may affect chain wheel’s strength. The roller is flexible to turn. It is anti-rust as well. Our marine chain wheels are approved by quality inspection center. If you’re interested in our products, please feel free to contact us.

Read MoreSend Inquiry
CB 3062-2011 Four Roller Fairlead Type B

CB 3062-2011 Four Roller Fairlead Type B

CB 3062-2011 Four Roller Fairlead Type B Fairlead with horizontal rollers, consisting of vertical and horizontal rollers, can guide mooring ropes from any direction.

Read MoreSend Inquiry
CB 58-83 Guide Roller

CB 58-83 Guide Roller

CB 58-83 Guide Roller CB*58-83 fairlead roller is applicable to guiding mooring rope’s direction. Its roller diameter varies from 100mm to 450mm. The material of CB58-83 roller can be steel or iron. Steel wire, hemp wire and synthetic fiber wire are suitable for CB*58-83 standard fairlead roller. Among these three types of wire, the steel wire has the largest breaking load value.

Read MoreSend Inquiry
Type U.S. Panama Chock

Type U.S. Panama Chock

Type U.S. Panama Chock/​Panama Chocks Panama chocks are very important mooring equipment. It bears tremendous loads when mooring the vessels. We provide deck mounted Panama chocks (JIS F 2017-1982 type AC,AP),bulwark mounted Panama chocks (JIS F 2017-1982 type BC,BP) and Type U.S. Panama chocks. If you’re interested in our chocks, please feel free to contact us.

Read MoreSend Inquiry
<...678910...255>
Hit enter to search or ESC to close